Passed Certification
IATF16949:2016
中文

Application of top wave spring

  • Home
  • Spring
  • Application of wave spring
  • Application of top wave spring
  • Application of top wave spring
    • Floating Gear Application
      Floating Gear Application
      Functioning in a contained bracket,a vave spring loads the gear with light ,yet accurate force allowing axial movement.The gear shown in this application self-aligns with its mating gear during operation.
    • Rotary Union Application
      Rotary Union Application
      This application incorporates both a single-tren and a wave spring.The union cross section of the wave spring allows it to be installed in the assembly without interfering with mating components.The single turn wave spring takes up play and reduces vibration in a bearing preload capacity.The force of the wave spring ,when compressed ,helps create a seal to prevent fluid from flowing from the high pressure to the low pressure side of the union.
    • Water valve Application
      Water valve Application
      A wave spring also known as a flat wire compression spring,prevents the valve handle from rotating by maintaining aconstant load and engaging the threads on the main shaft. As the handle rotates counter-clockwise,wave spring resistance in creases and rotation is less likely.
    • Pressure Relief valve Application
      Pressure Relief valve Application
      An exact pressure is accomplished using a wave spring. Air pressure under the assembly causes the spring load to increase,forcing the plate away from the sealing surface providing the pressure relief mechanism. When the load against the spring decreases, allowing the unit to seal once again.
    • Valve Application
      Valve Application
      As the fluid pressure increases the wave spring precisely controls the linear displacement of the piston,which positions the orifice for proper fluid flow.
    • Flow Valve Application
      Flow Valve Application
      As the fluid pressure increases the wave spring precisely controls the linear displacement of the piston,which positions the orifice for proper fluid flow.

    Contact us

    Need customized products? MASCOT technology can customize your products according to the needs of all your projects.
    If you have any opinions and suggestions or are willing to cooperate with us to achieve a win-win situation, please contact us as soon as possible.
    • Telephone: (+86) 512 53985968      (+86) 400-008-3858
    • Email:sales@mascotspring.com      cs18@mascotspring.com
    • Scan wechat and pay attention to us